Engineer-led quotations.
Every enquiry is reviewed for manufacturability, not just priced. If a change makes a part lighter, stiffer or cheaper to machine, we say so.
Wholesale · OEM · Aerospace
Carbon fiber parts and flight electronics for everything that flies.
Rox Aero manufactures carbon fiber components for UAVs, armed UAVs, rockets, helicopters and aircraft, and designs flight controllers and ground control software — supplied wholesale to aerospace manufacturers and integrators.
- WholesaleBatch supply to manufacturers, integrators and distributors
- Every platformUAV, UCAV, rocket, helicopter and aircraft parts
- OEMFlight controllers with private-label options
- Made to drawingCarbon fiber parts from your DXF or STEP data
Wholesale & OEM supply — quotations by e-mail or WhatsApp
Products
Carbon fiber aerospace components and UAV flight controllers.
The structure that carries the aircraft, the electronics that fly it and the software that talks to it — from one supplier.
Flight Controllers
FC-1 Flight Controller
A compact enclosed flight controller for multirotor and fixed-wing UAVs: four ESC channels, ten servo outputs, a 6-axis IMU and a serial RC input in one unit.
Wholesale & OEM Details
Carbon Fiber Components
Carbon Fiber Aerospace Components
Carbon fiber structural parts for UAVs, armed UAVs, rockets, helicopters and aircraft — manufactured to drawing and supplied in wholesale quantities.
Wholesale only Details
Ground Control
RoxAero GCS
Desktop ground control station software for Rox Aero flight controllers: attitude, battery, RC channels and every actuator output on one screen.
Supplied with FC-1 Details
Simulation & Analysis
RoxAero Aerodynamics Workbench
A virtual wind tunnel for UAV airframes: load a wing or fuselage as a 3D model, set the flow conditions and read lift, drag and flow structure.
Engineering service Details
Platforms
Carbon fiber parts for every kind of aircraft.
Not only multirotors. We manufacture structural carbon fiber parts for unmanned and manned platforms, to your drawings, in wholesale quantities.
-
UAV parts
Frames, arms, ribs, spars, booms and payload mounts for multirotor and fixed-wing UAVs.
-
UCAV parts
Airframe structure, payload bay and hardpoint plates, covers and access panels for armed UAVs.
-
Rocket parts
Body tubes, fins and fin cans, nose cones, couplers and avionics bay plates.
-
Helicopter parts
Frame and chassis plates, tail booms, fairings, skid and equipment mounts.
-
Aircraft parts
Ribs, panels, brackets, fairings and interior structural parts.
Wholesale ordering
From drawing to delivered batch in four steps.
-
Enquiry
Send drawings, material thickness and quantities by form, e-mail or WhatsApp.
-
Quotation
We return unit pricing by quantity, lead time and a manufacturability review.
-
Sample
A first-article sample is produced for fit and quality approval.
-
Production
The batch is machined, inspected and packed. Repeat orders run against the same record.
Capabilities
What we manufacture and engineer.
Carbon fiber production and avionics design sit side by side, so the people quoting your parts also understand the aircraft they go into.
All capabilities- 01 Carbon Fiber Manufacturing Volume production of carbon fiber parts for UAVs, armed UAVs, rockets, helicopters and aircraft — plates, tubes, shaped parts and custom structural components made to drawing.
- 02 Flight Control Electronics Flight controller and avionics hardware designed in-house: schematic, PCB layout, enclosure, manufacturing data and bring-up.
- 03 Embedded Firmware & Control Real-time firmware for flight computers: sensor fusion, stabilization loops, mixer logic and RC protocol handling.
- 04 Ground Segment Software Operator software for monitoring and commanding the aircraft, developed against the same hardware map as the flight computer.
- 05 Aerodynamic Simulation Numerical wind-tunnel studies of UAV wings and airframes, from fast interactive estimates to OpenFOAM reference runs.
Why Rox Aero
A supplier that understands the whole aircraft.
One source for the stack.
Frame parts, flight controller, firmware and ground software are developed together, so they fit together.
Built for repeat orders.
Approved parts are re-ordered against the same drawing and inspection record, batch after batch.
FAQ
Wholesale and OEM questions.
Something else? Ask us directly.
Do you sell single parts or retail quantities?
No. Rox Aero supplies on a wholesale and OEM basis to manufacturers, integrators and distributors. Orders are produced in batch quantities.
Which platforms do you make carbon fiber parts for?
UAVs of every layout — multirotor and fixed-wing — as well as armed UAVs (UCAV), rockets, helicopters and aircraft. If it flies and it needs a carbon fiber structural part, send us the drawing.
Can you manufacture carbon fiber parts from our own drawings?
Yes. Send DXF, STEP or PDF drawings with the material thickness and quantity. We review manufacturability and return a quotation with unit pricing and lead time.
Is there a minimum order quantity?
Minimum quantities depend on the part and the material. Tell us what you need and your expected yearly volume, and we will quote the most economical batch size.
Can we get a sample before placing a volume order?
A first-article sample can be produced for fit and quality approval before batch production starts.
Do you offer OEM or private-label flight controllers?
For volume orders of the FC-1 flight controller we can discuss private labeling, connector options and firmware defaults for your airframe.
How do we request a quotation?
Use the contact form, e-mail info@roxaero.com or message us on WhatsApp. Include drawings, quantities and your delivery country.
News
Guides and updates.
6 min read
UAV Flight Controller Channels: Servos & ESCs
Determine the necessary UAV servo channels and ESC outputs for your VTOL or fixed-wing aircraft. Optimize your flight control system.
Read article
5 min read
SBUS, iBUS, PPM: Choosing an RC Receiver Protocol
Compare SBUS, iBUS, and PPM RC receiver protocols to select the best option for your UAV flight controller and aircraft.
Read article
5 min read
Isolate Servo Power From Flight Controller Logic
Learn why separating servo power from flight controller logic is crucial for reliable UAV operation and robust flight control power design.
Read article